This article is comprehensive in covering all the anticipated configurations and organizational requirements for setting up a VPN connection through your Internet Provider or the corporate server for work-related situations.
Our purpose here is to show you how to create, edit, and delete these VPN connections as the need arises.
These “How to” instructions apply only to the Windows 8 operating system and are not useful in setting up VPN connections on any other operating system.
There is system network information you need to have available to identify your originating server and IP address before you begin the process of setting up the VPN connection. There are VPN apps that will do this for you automatically, and some that don’t. If you want to make this a more straightforward task, use a VPN app that does the heavy lifting to get your VPN connection up and running.
- You need to know the domain name and IP address you are trying to connect to create a VPN connection. For example, you must have this information ready when you create your VPN connection to the server if you work for a company named Contoso. We will need this info as we walk through the screenshots presented below.
- Let’s call the Contoso VPN server VPN1.contoso.com at IP address 10.0.0.25
- If you’re doing this from your home computer and going through and Internet provider, choose a VPN server from the ones available through your VPN app.
- You will need your username and password
- You must be connected to the Internet to connect to a VPN server at your company or the one you are going to communicate with via tunneling and encrypting via your Internet provider.
- Some companies require the use of a smart card. You may need a smart card reader connected to your computer before you attempt to connect to your company.
- Private Internet providers do not typically use smart cards or intermediate identification devices. Your username and password should suffice.
Using the Desktop to Establish a new VPN connection
To create a new VPN connection
- Locate and right-click on the Network icon in the taskbar. The network icon can typically be found on the right side of the bottom Windows taskbar. Click Open Network and Sharing Center to open the Network and Sharing Center.
- Look for Change your networking settings option in the Network and Sharing Center. Tap the Set up a new connection or network to open the Set up a Connection or Network
- Pick Choose a connection option, click Connect to a workplace, and then click
- Now, let’s configure the How do you want to connect option. Start by clicking on the Use my Internet connection (VPN)
- The configuration wizard will ask you to either select the corporate VPN option you just set up or create a different VPN connection. So, choose the one you see, create a new VPN, or do nothing.
- Type the Internet address to connect to, Internet address, type the IP address of the VPN server to which you want to connect. On the Destination nameoption, give the VPN connection a name you will recognize for easier identification later. Choose something like a Contoso VPN connection for your company VPN server or FlashVPN for your private VPN server. Don’t forget to check any checkboxes to tailor your situation to your needed configuration.
- Now, you are ready to click Create. This activates the VPN connection, and you should now see the newly configured VPN network connection on the Networks
Connect using VPN
The easiest way to access the configured VPN connection from the Desktop is to left-click the network icon in the system tray. The left-click opens the Networks sidebar and displays your VPN connection. To connect, left-click the VPN connection, and then click Connect, Network Authentication. Type your username using the format, DOMAIN\User name. Enter the password, and you are tunneling through the server using encrypted data.
Using the Start screen to Create a new VPN connection
In Windows 8, the Get Connected Wizard is another method to configure a VPN profile. To launch the wizard, use the Start button and then tap the SETTINGS icon—type VPN in the Settings window. Now, tap the Set up a virtual private network (VPN) connection, as shown in figure 1.
Figure 1: Settings Window
Once you click on the Set Up a Virtual Private Network (VPN) Connection, the dialog box in figure 2, Create a VPN Connection, will pop up.
Enter the information in each block from the information you gathered in the preparation phase discussed earlier. Remember that the IP address or the fully qualified domain name of the Remote Access server can be used. If, by chance, you’ve already configured a VPN connection, jump down to figure 8 and follow those steps to find the domain name or IP address.
You can also instruct the computer to remember your VPN credentials by using the checkbox Remember Credentials, following your first successful connection attempt.
As mentioned in the introduction to this article, the Get Connected Wizard is an automated procedure that handles many of the manual settings you’ve been entering and remembers them using registry entries. For that reason, authentication and tunneling protocols are automatically negotiated between the VPN server and your computer using the START button method. Once these protocols are arranged, they can be edited using the Connection Properties dialog box (discussed later)
Figure 2: Wizard Screen One
Figure 3: Charms Bar Dialog Box
Using an Existing Corporate Network VPN Connection
- Open the Charmsdialog box (figure 3) by moving the cursor to the top or bottom right corner of your computer screen. It can also be accessed using the Win+C keyboard keys pressed simultaneously.
- Click Settings then the network icon (see figure 4) that is displayed in the bottom right corner of the screen.
- In Networks, select the desired VPN connection. Then click Connect (Figure 5)
When you click Connect, using your saved credentials, a connection is negotiated with the server. If you did not put a checkmark in the Remember Credentials while configuring the connection (figure 2), you would have to enter them manually (figure 6).
If your credentials have been changed, you can clear the cached credentials by right-clicking the connection and choose the Clear Cached Credentials option, as shown in figure 7.
Figure 6: Network Authentication Credentials
Figure 7: View and Clear Credentials
Editing VPN Credentials
Figure 8: Connection Properties
Connection Properties has four tabs. Click each tab in sequence from left to right and do the following:To edit a VPN connection that you have already configured, right-click the connection, and then select the VPN connection properties. To access Connection Properties, in the Networks view, click View Connection Properties to bring up the dialog box (figure 8).
- General Tab
Change the VPN server hostname or IP address, and configure an interface to a public network.
Configure point-to-point protocol (PPP) settings and enable or disable caching of credentials.
Configure tunnels, authentication, and encryption settings.
Configure transports (or protocols). The most common protocols are TCP/IPv4 and TCP/IPv6.
Delete a connection
On the Start screen, click Search in Charms, type VPN, and then click View Network Connections under Settings.
Figure 9: View Network Connections
Right-click a VPN connection, and then click Delete, as shown in Figure 10.
Figure 10: Deleting a connection
Setting Up A VPN Connection in Windows 8.1
With the introduction of the 8.1 operating system, Microsoft greatly enhanced the internal capabilities of setting up a VPN connection. The wizards and other infrastructure of Windows 8 were upgraded significantly. The entire process involves selecting the correct commands from the Control Panel and follow the steps in the order given.
Is a link to an online tutorial that will take you from beginning to end in less than five minutes, including how to deal with any errors you might encounter. In the tutorial, you’ll recognize many of the same features you saw in Windows 8, but in a much more streamlined and smooth execution. All the guesswork is removed, giving you a much better chance for success. The source is avoiderrors
Planet FreeVPN for [platform]
on VPNBase rating